Design and implementation of two-way authentication system using Rapsberry PI
Loading...
Date
2019-08
Authors
Journal Title
Journal ISSN
Volume Title
Publisher
Kampala International University,School of Engineering and Applied Sciences , Department of Computer and electrical Engineering
Abstract
In recent years, there have been rise in the number of applications based on Radio Frequency Identification (RFID) systems and have been successfully applied to different areas such as transportation, health, education, hospitality industry and many others. RFID technology facilitates automatic wireless identification using electronic passive and active tags with suitable readers. In this project, I dealt with solving the problem of theft in our inhabitants by locking the gate and the door using RFID technology. The application of RFID as two-way authentication was designed to help people to access their gate and the door of a certain compound being identified before entering the compound to reduce on the theft in our environment and to know who enters the compound. The system will use a Raspberry Pi technology to allow it perform these tasks of identification well. In this system, once the person reaches the gate of the compound, the person has to identify him/herself by putting the tag card in front of the tag reader, this one, once identified will process the data to the Raspberry Pi and it’s to the Raspberry Pi to check the given data on the tag to confirm the person’s entrance and therefore the gate opens by the servo motors rotating a certain angel, then after this has happened, the gate can be opened and the person may access the gate and enter the compound, once the car has passed, the proximity sensors detects the presence of the car and after a specific amount of second, it closes the gate by reactivating the servo motors again. Similarly at the door point, when the person reaches the door he or she has entered the password and the keypad sends the code to the raspberry pi and it’s the one to confirm the code whether it’s to be accepted or to be ejected, and once it is allowed, the signal is sent to the servo motors controlling the door and therefore the door opens and the person may access the door and enters the house, once inside can go out by using the push button then the servo motor opens the door automatically and the person may access the door and exit the house, this is the same when you enter the house and wishes to lock the door again, all that you have to do is press the push button, and it closes automatically by activating the servo motors.
Description
Final Year Project report Submitted to Kampala International University in Partial Fulfillment of the Requirements for the Award of the Degree of Bachelor of Science in Telecommunications Engineering
Keywords
Design & implementation, Authentication